4D eSun Filament เส้นสามารถคืนตัวได้เมื่อโดนน้ำ

คำอธิบาย

Product description

What is 4D material?
With 3D printer equipment, a model printed with 4D filament can change the original shape under certain conditions.

The shape can also be gradually returned to its original shape by stimulating external conditions (temperature etc.).

4D material is an innovation made of 3D material. Do you think that this is a magical material? See how to use it!

4D material pressure parameters:
Printing temperature: 200-210°C.
Bed temperature: 35-50°C.
Printing speed: 40-90 mm/s.
Density: 1.23 g/cm³.
Melting index: 5.8 (200°C/2.16kg) g/10 min.
Tensile strength: 58MPa.
Elongation at break: 115%.
Flexible resistance: 60.28 MPa.
Deformation temperature: 45-90°C.
Fixed percentage: 95%.
Recovery percentage: 95%.

Usage:
1. Print model: Select a suitable 3D printer, print the desired model according to the operation of the 3D printer and the 4D material printing parameters.

2. Deformation: Put the finished model in hot water for 1-3 minutes at 45-90°C until the model changes from hard to soft. The actual deformation time depends on the thickness of the model. Quickly deform the model into the desired shape.

3. Binding system: Keep the deformation condition until the temperature of the model falls below room temperature. At this time, the model remains in the deformed shape for a long time.

4. Restoration: Place the deformed model in hot water for 1-3 minutes at 45-90°C until the model changes from hard to soft. The actual recovery time depends on the thickness of the model. And you will see how the model gradually returns to its original shape.

 

รูปแบบสินค้า
รับสินค้าที่ร้าน สถานที่

1,990.00 ฿

  • ส่งวันนี้? สั่งซื้อภายใน: Dec 23, 2024 11:00:00 +0700
  • Fast Delivery

เพิ่มเพื่อน 

 

คำอธิบาย

Product description

What is 4D material?
With 3D printer equipment, a model printed with 4D filament can change the original shape under certain conditions.

The shape can also be gradually returned to its original shape by stimulating external conditions (temperature etc.).

4D material is an innovation made of 3D material. Do you think that this is a magical material? See how to use it!

4D material pressure parameters:
Printing temperature: 200-210°C.
Bed temperature: 35-50°C.
Printing speed: 40-90 mm/s.
Density: 1.23 g/cm³.
Melting index: 5.8 (200°C/2.16kg) g/10 min.
Tensile strength: 58MPa.
Elongation at break: 115%.
Flexible resistance: 60.28 MPa.
Deformation temperature: 45-90°C.
Fixed percentage: 95%.
Recovery percentage: 95%.

Usage:
1. Print model: Select a suitable 3D printer, print the desired model according to the operation of the 3D printer and the 4D material printing parameters.

2. Deformation: Put the finished model in hot water for 1-3 minutes at 45-90°C until the model changes from hard to soft. The actual deformation time depends on the thickness of the model. Quickly deform the model into the desired shape.

3. Binding system: Keep the deformation condition until the temperature of the model falls below room temperature. At this time, the model remains in the deformed shape for a long time.

4. Restoration: Place the deformed model in hot water for 1-3 minutes at 45-90°C until the model changes from hard to soft. The actual recovery time depends on the thickness of the model. And you will see how the model gradually returns to its original shape.

 

Recently viewed products

เข้าสู่ระบบ

ลืมรหัสผ่าน

คุณมีบัญชีหรือยัง?
สร้างบัญชี