Translucent Orange TPU 95A eSun Filament

Description

TPU 95A eSun Filament for 3D Printer

Product Description
TPU material has excellent flexibility, tear resistance, abrasion resistance, and cut resistance, and is strong and durable. TPU fibers have high hardness and good recovery, making them ideal for applications such as insoles and other applications.

Selling Points:

  • Flexible and soft

  • Strong and durable

  • High flexibility

  • High toughness

  • Good impact resistance

note:

  1. It is recommended to pre-cure the filament at 55°C for at least 4 hours for best results and it is recommended to use it with an eBOX during printing.

  2. It is recommended to use a direct drive dual-wheel extruder designed for flexible materials, as TPU-95A is often difficult to print with a bowden extruder. If a bowden extruder is required, the print speed should be reduced to approximately 20 mm/s or less.

  3. The nozzle may accumulate dirt after continuous use. It is recommended to use a cleaning filament and, if necessary, replace the nozzle or throat.

Description

TPU material has good flexibility, high tear resistance and wear resistance and cut resistance, sturdiness and durability; TPU filament has high hardness and good resilience, can be used for insoles and other applications.

Sellingpoint

Flexible and soft
Sturdy and durable
High flexibility

High toughness
High impact resistance

Notes

1. It is recommended to dry the printing (55℃/＞4H) to achieve the best printing effect. It is recommended to use it with eBOX cartridges when printing.
2. It is recommended to use a short-range two-wheel reduction extruder designed for flexibility, TPU-95A materials are usually difficult to print on a remote extrusion machine. The remote extruder can try to print at a slower speed at 20mm/s or even slower.
3. The nozzle may have impurities after printing for a long time. It is recommended to use it with the cleaning filament. If necessary, replace the nozzle and throat with a new one.

Product form
Free pickup in our shop(s)

1,099.00 ฿

  • Shipped today? Order within: Oct 10, 2025 11:00:00 +0700
  • Fast Delivery

Product Details

1.75 mm, 1 KG

Printing Setting

  • Temp: 220 - 250℃ (Recommended 240℃)
  • Bed Temperature: 45 - 60℃
  • Fan Speed: 0%
  • Print Speed: 20 - 50 mm/s

Printing Troubleshooting Guide

Description

TPU 95A eSun Filament for 3D Printer

Product Description
TPU material has excellent flexibility, tear resistance, abrasion resistance, and cut resistance, and is strong and durable. TPU fibers have high hardness and good recovery, making them ideal for applications such as insoles and other applications.

Selling Points:

  • Flexible and soft

  • Strong and durable

  • High flexibility

  • High toughness

  • Good impact resistance

note:

  1. It is recommended to pre-cure the filament at 55°C for at least 4 hours for best results and it is recommended to use it with an eBOX during printing.

  2. It is recommended to use a direct drive dual-wheel extruder designed for flexible materials, as TPU-95A is often difficult to print with a bowden extruder. If a bowden extruder is required, the print speed should be reduced to approximately 20 mm/s or less.

  3. The nozzle may accumulate dirt after continuous use. It is recommended to use a cleaning filament and, if necessary, replace the nozzle or throat.

Description

TPU material has good flexibility, high tear resistance and wear resistance and cut resistance, sturdiness and durability; TPU filament has high hardness and good resilience, can be used for insoles and other applications.

Sellingpoint

Flexible and soft
Sturdy and durable
High flexibility

High toughness
High impact resistance

Notes

1. It is recommended to dry the printing (55℃/＞4H) to achieve the best printing effect. It is recommended to use it with eBOX cartridges when printing.
2. It is recommended to use a short-range two-wheel reduction extruder designed for flexibility, TPU-95A materials are usually difficult to print on a remote extrusion machine. The remote extruder can try to print at a slower speed at 20mm/s or even slower.
3. The nozzle may have impurities after printing for a long time. It is recommended to use it with the cleaning filament. If necessary, replace the nozzle and throat with a new one.

Recently viewed products

Login

Forgot your password?

Don't have an account yet?
Create account