Description
High strength and high toughness
Based on Anycubic's classic standard resin, Anycubic Standard Resin V2 has improved toughness, with an elongation at break of up to 93%. The result is a part that is impact resistant, strong, and resistant to breakage, while maintaining optimal flexibility.
Odor reduction
By upgrading the resin formula, the resin odor is significantly reduced, creating a more comfortable printing environment for users.
High resolution with minimal shrinkage
With a significantly reduced shrinkage rate, the risk of part distortion is reduced, allowing for maximum accuracy and sharp, vivid details in your prints.
Versatile applications with high printing success rate
As an entry-level resin, Anycubic Standard Resin V2 offers a high print success rate, making it ideal for printing projects requiring high strength and toughness, such as industrial parts, components, tools, architectural models, prototype proofing, and figure design.
![]()
Instructions for use
(1) Before use:
Shake the resin bottle well before use. Clean the resin tank and molding platform to ensure the bottom of the resin tank is in good condition for light transmission.
(2) During use:
Open the bottle cap and pour the resin into the resin tank according to the printer's specifications, then select the correct printing parameters and settings according to the type of machine.
(3) After use:
After printing is complete, use appropriate tools for post-processing, including knives, diagonal nippers, tweezers, containers, gloves, and cleaning agents such as ethanol (≥95%), lactate, or isopropyl alcohol.
(4) Post-processing steps:
A. Use a knife to carefully separate the finished workpiece from the printing bed.
B. Soak the workpiece in cleaning solution, wash it clean or use an ultrasonic wash machine, then drain the water. It is recommended to use the ANYCUBIC Wash and Cure machine for better results.
C. Perform additional steps as appropriate, such as support removal, polishing, coloring, etc.
Precautions
-
The ideal environment for storing uncured resin is in a cool, dark place, room temperature, and away from sunlight or high heat.
-
The recommended temperature for use is 18–35°C. If the temperature is too low, it may affect the print quality, so you can slightly warm the resin before use (not more than 60°C ).
-
If pigment precipitation is found in the resin, it can be used after stirring or shaking to mix well.
-
To preserve the properties of the resin, the workpiece should be removed from the cleaning solution as soon as possible after washing to avoid prolonged immersion.
-
To obtain the best mechanical properties of the workpiece , post-curing should be performed as soon as possible after washing and drying.
-
To obtain the best performance of the material, the intensity and duration of the exposure after curing should be controlled, with the following recommendations:
(1) The light intensity from a mercury lamp or LED light source should be 5–10 mW/m² and the duration should not exceed 1 hour (can be adjusted as appropriate).
(2) Sunlight baking in summer takes about 1 hour.
(3) Do not place the workpiece near or in contact with high-intensity light sources for a long time, such as high-pressure mercury lamps.
(4) It is recommended to print in a room with low light or close the printer cover while printing because resin is a photosensitive material.
Note (PS):
Material properties may vary depending on the printing device, curing method, and testing equipment used.
For safety information, please refer to the MSDS (Material Safety Data Sheet) for this product.
If you encounter any problems during use, please feel free to contact us at any time.
