Working with eSUN Inslogic resin isn't just about technique; safety is equally important. There are 5 essential things you need to know and follow: from studying the manufacturer's documentation, always wearing nitrile gloves and safety glasses, storing the resin correctly away from UV light and food, washing your hands with mild soap and washing clothes immediately, to cleaning the area with ethanol or IPA. Because good work starts with safety, read the complete details of all 5 points in this article.

Working with eSUN Inslogic resin is complex and requires various tools, as well as specialized skills and knowledge. Therefore, safety should not be overlooked. To ensure the smoothest operation possible, we would like to share safety information that you should know and adhere to when working with this type of material. Let's explore and apply these guidelines.

Strictly Follow Safety Precautions When Working with eSUN Inslogic Resin

1. Always Study Manufacturer's Documents

As mentioned, working with eSUN Inslogic resin is complex and its use varies. It is recommended to study the safety data sheets provided by the resin supplier. These documents contain complete details on both safety and usage. Understanding them will ensure the smoothest operation possible.

2. Always Wear Protective Equipment During Use

When using resin, personal protective equipment is essential. This includes gloves that protect against various chemicals, such as nitrile or neoprene. Latex gloves should not be used as they are prone to damage during use. Gloves should extend up to the wrist. Next are safety glasses, goggles, and a lab coat or an appropriate coat worn over your clothing.

3. Understand Proper Resin Storage

Proper storage of eSUN resin is another crucial aspect. It is recommended to store it with a small air gap to prevent the resin from clumping. Cured UV resin should be stored in a sealed container, away from direct sunlight. It must be kept at appropriate room temperature according to recommendations. Do not fill the resin container to the brim. Do not pour used or uncured resin into a new resin bottle immediately. Finally, do not store uncured resin in a refrigerator used for beverages or food intended for consumption.

4. Avoid Direct Contact, Wash Hands Thoroughly, Wash Clothes Cleanly

Cleanliness is paramount. It is essential to avoid direct contact with UV-cured resin or contaminated surfaces, as well as any part of the clothing worn. If gloves are not worn, direct contact is strictly prohibited. You should wash your hands, face, or any body part that might have unknowingly come into contact with resin using a mild skin cleansing soap. Do not use solvents. Clothes worn for work must be removed and washed immediately with a specialized laundry detergent; do not leave them overnight.

5. Clean the Work Area

Finally, clean the work area. Immediately clean all contaminated areas to prevent further contamination. If resin spills, wipe it up immediately. For cleaning, use ethanol or isopropyl alcohol as specified in the resin's safety data sheet. Afterward, wash with soap and water.

Working with eSUN Inslogic resin requires careful attention, especially regarding safety, for both yourself and those around you. This type of work involves odors and potential contact that demand extreme caution to ensure your long-term health. We hope this information helps you perform your tasks smoothly. 

Tags

3D Printing resin

• Share on:
• WhatsApp
• Deel
• Tweet
• Pin it
• Messenger
• Email

---