Description
TPU 95A eSun Filament for 3D Printer
Product Description
TPU material offers excellent flexibility, tear resistance, abrasion resistance, and cut resistance. It is strong and durable. TPU filament has high hardness and good resilience, making it suitable for applications such as insoles and other uses.
Selling Points:
- Flexible and soft
- Strong and durable
- High elasticity
- High toughness
- Good impact resistance
Printing Parameters
-
Hardness: 95A Shore A
-
Nozzle Temp: 220 - 250°C (Recommended 235°C)
-
Bed Temp: No heat required, or 45 - 60°C
-
Printing Speed: 20 - 40 mm/s
-
Diameter: 1.75 mm
Note:
- It is recommended to dry the filament before printing at 55°C for at least 4 hours for best results, and to use it with an eBOX during printing.
- It is recommended to use a direct drive extruder designed for flexible materials, as TPU-95A is often difficult to print with a Bowden extruder. If a Bowden extruder must be used, the printing speed should be reduced to approximately 20 mm/s or less.
- The nozzle may accumulate residue after continuous use. It is recommended to use cleaning filament, and if necessary, replace the nozzle or throat.
