PLA-LW (Lightweight) eSun Filament

Description

PLA-LW (Light Weight) eSun Filament

    A material specially developed for aeromodelling. The interlayer bonding is stable, and the foaming rate and strength can be controlled by adjusting the printing temperature. Using active foaming technology to achieve lightweight, low-density PLA parts, the foaming volume ratio is 220%, and the density is as low as 0.54g/cm3. Foaming makes the layered pattern almost invisible, and the surface of the printed item is matte and delicate. Under the same model and at the same speed, the lightweight PLA enables the model aircraft to have a lighter wing load and a lower stall speed, which can greatly improve the performance of the model aircraft.

    Selling Points

    • Density as low as 0.54 g/cm3
    • Foaming volume ratio 220%
    • Free adjustment of strength and foaming ratio
    • Excellent matte surface effect

      Product form
      Free pickup in our shop(s)

      1,190.00 ฿

      • Shipped today? Order within: Jul 04, 2026 11:00:00 +0700
      • Fast Delivery
      Chat on LINE and FB Messenger

      Description

      PLA-LW (Light Weight) eSun Filament

        A material specially developed for aeromodelling. The interlayer bonding is stable, and the foaming rate and strength can be controlled by adjusting the printing temperature. Using active foaming technology to achieve lightweight, low-density PLA parts, the foaming volume ratio is 220%, and the density is as low as 0.54g/cm3. Foaming makes the layered pattern almost invisible, and the surface of the printed item is matte and delicate. Under the same model and at the same speed, the lightweight PLA enables the model aircraft to have a lighter wing load and a lower stall speed, which can greatly improve the performance of the model aircraft.

        Selling Points

        • Density as low as 0.54 g/cm3
        • Foaming volume ratio 220%
        • Free adjustment of strength and foaming ratio
        • Excellent matte surface effect

          Frequently Asked Questions

          • PLA-LW คืออะไร ทำไมถึงเรียก Lightweight?

            PLA-LW มี Foaming Agent เมื่อพิมพ์ที่อุณหภูมิสูง (220–250°C) จะเกิดฟองอากาศขนาดเล็กในเนื้อวัสดุ ทำให้ชิ้นงานเบากว่า PLA ปกติถึง 50–60%

          • ต้องตั้งอุณหภูมิเท่าไหร่?

            อุณหภูมิหัวฉีด 210–250°C ยิ่งร้อนยิ่ง Foam มากยิ่งเบา ต้องลด Flow Rate ลง 30–50% เพื่อชดเชยการขยายตัว

          • PLA-LW (Lightweight) eSun Filament เหมาะกับงานอะไรบ้าง?

            เหมาะมากสำหรับ RC Aircraft ปีก Drone โครงเครื่องบินโมเดล และชิ้นงานที่ต้องการน้ำหนักเบาสูงสุด

          • ต้องปรับ Flow Rate อย่างไร?

            ลด Flow Rate ลงประมาณ 30–50% ขึ้นอยู่กับอุณหภูมิที่ใช้ ต้องทดสอบหาค่าที่เหมาะกับเครื่องแต่ละรุ่น

          • ชิ้นงาน PLA-LW แข็งแรงแค่ไหน?

            แข็งแรงต่ำกว่า PLA ปกติ แต่ Strength-to-Weight Ratio ดีเยี่ยม เหมาะกับงาน RC ที่ต้องการเบาสูงสุด

          • ควรใช้หัวฉีดขนาดไหน?

            แนะนำ 0.4–0.6 mm เพื่อให้ Foam กระจายตัวดี

          • ควรเก็บอย่างไร?

            เก็บในถุงสุญญากาศพร้อมสารดูดความชื้น ความชื้นทำให้ฟองขนาดใหญ่ผิดปกติ

          • ต้องปรับ Slicer อะไรบ้าง?

            ต้องปรับ Flow Rate, Temperature Profile และ Layer Height ให้เหมาะสม ดู Preset PLA-LW ใน Cura หรือ PrusaSlicer

          Recently viewed products

          Login

          Forgot your password?

          Don't have an account yet?
          Create account