Anycubic Wash & Cure 3 Plus

Description

Higher compatibility

Anycubic Wash and Cure 3 Plus has been upgraded its washing size to 8.97''x5.03''x10.23'', and compared to the original Wash & Cure Plus, the washing basket capacity has been increased by about 13.4% to 7.6 liters, suitable for many LCD 3D printers, such as Photon Mono M5s, Photon Mono M7 Pro, Saturn 3/4 Series or other models up to 10.6 inches in size.

Flexicure Gooseneck Light

With its innovative Flexicure light bulb design, the Wash & Cure 3 Plus can deliver up to 30,000uW/cm²* of power within a 1–3cm illumination range, enhancing drying efficiency in delicate areas such as the top of a model, the skirt of a figure, or other small, hard-to-reach areas. The bulb is also bendable, making it even more convenient to use.

Improved drying efficiency

The Anycubic Wash & Cure 3 Plus features a new light bead arrangement combined with a lens light source, which increases drying consistency by 20%* compared to the previous Wash & Cure Plus model. This results in more even drying, improved model surface quality, and greater model stability.

Effective use of IPA

The double-layer PP material washing basket supports washing with the printing plate and is rust-resistant. It has two adjustable height levels, 150 mm and 250 mm, to accommodate printing plates of 6.6–10.6 inches, allowing for the most cost-effective and efficient use of IPA solution.

Dual-layer Curing

The specially designed two-tier drying platform increases the number of models that can be dried per cycle and significantly improves drying efficiency.

Product form
Free pickup in our shop(s)

7,000.00 ฿

  • Shipped today? Order within: Jul 02, 2026 11:00:00 +0700
  • Fast Delivery
Chat on LINE and FB Messenger

Product Details

  • Larger upgrade: 7.6-liter incubation area, dimensions 228 × 128 × 260 mm.
  • Superior curing efficiency: Maximize light energy output to 30,000 µW/cm² with a gooseneck lamp.
  • Economical IPA usage: The double-layered curing stand design effectively reduces IPA consumption.

Description

Higher compatibility

Anycubic Wash and Cure 3 Plus has been upgraded its washing size to 8.97''x5.03''x10.23'', and compared to the original Wash & Cure Plus, the washing basket capacity has been increased by about 13.4% to 7.6 liters, suitable for many LCD 3D printers, such as Photon Mono M5s, Photon Mono M7 Pro, Saturn 3/4 Series or other models up to 10.6 inches in size.

Flexicure Gooseneck Light

With its innovative Flexicure light bulb design, the Wash & Cure 3 Plus can deliver up to 30,000uW/cm²* of power within a 1–3cm illumination range, enhancing drying efficiency in delicate areas such as the top of a model, the skirt of a figure, or other small, hard-to-reach areas. The bulb is also bendable, making it even more convenient to use.

Improved drying efficiency

The Anycubic Wash & Cure 3 Plus features a new light bead arrangement combined with a lens light source, which increases drying consistency by 20%* compared to the previous Wash & Cure Plus model. This results in more even drying, improved model surface quality, and greater model stability.

Effective use of IPA

The double-layer PP material washing basket supports washing with the printing plate and is rust-resistant. It has two adjustable height levels, 150 mm and 250 mm, to accommodate printing plates of 6.6–10.6 inches, allowing for the most cost-effective and efficient use of IPA solution.

Dual-layer Curing

The specially designed two-tier drying platform increases the number of models that can be dried per cycle and significantly improves drying efficiency.

Frequently Asked Questions

  • Wash & Cure 3 Plus คืออะไร ทำอะไรได้บ้าง?

    เครื่องล้างและอบ Resin แบบ 2-in-1 ล้างชิ้นงานด้วย IPA และ Post-cure ด้วยแสง UV ในเครื่องเดียว ขนาด 3 Plus ใหญ่กว่ารุ่น 3 รองรับชิ้นงานขนาดใหญ่ขึ้น

  • Wash & Cure 3 Plus รองรับชิ้นงานขนาดใด?

    รองรับชิ้นงานสูงสุด 8.97'' × 5.03'' × 10.23'' เหมาะสำหรับเครื่อง M7 Max และรุ่นขนาดใหญ่

  • ล้างด้วยอะไร?

    ใส่ IPA 95%+ ลงในถัง แช่และล้างด้วยระบบหมุน ใช้เวลา 3–10 นาที

  • Post-cure ใช้เวลานานแค่ไหน?

    ขึ้นอยู่กับ Resin และขนาดชิ้นงาน โดยทั่วไป 2–5 นาที

  • ต่างจาก Wash & Cure 3 อย่างไร?

    Plus มีขนาดถังใหญ่กว่า รองรับชิ้นงานจากเครื่อง Resin ขนาดใหญ่ได้

  • ใช้กับ Resin ยี่ห้ออื่นได้ไหม?

    ได้ รองรับ Resin 405 nm ทุกยี่ห้อ

  • ต้องเปลี่ยน IPA บ่อยแค่ไหน?

    เมื่อ IPA สกปรกหรือข้น ส่วนใหญ่ 20–50 ชิ้นงานแล้วแต่ปริมาณ Resin

  • ทำความสะอาดเครื่องอย่างไร?

    ล้างถังด้วย IPA สะอาด เช็ดด้วยผ้าที่ไม่ทิ้งเส้นใย

Recently viewed products

Login

Forgot your password?

Don't have an account yet?
Create account