Description
ABS High Temp (ABS-HT) eSUN Filament
This is an ABS-type filament that has been modified to have higher heat resistance than regular ABS. It is suitable for applications requiring heat resistance combined with strength and impact resistance.
Key Features
High Heat Resistance — Heat Distortion Temperature (HDT) is approximately 104°C.
High Strength — Good tensile and flexural strength.
Impact Resistant — High toughness, good impact resistance.
Recommended Applications
ABS-HT is suitable for applications requiring heat resistance along with strength and impact resistance, such as:
- Industrial Parts
- Automotive components
- Electronic / Electrical Appliances
Precautions
- ABS has high shrinkage — without an enclosed printer or temperature control, warping or part deformation can easily occur.
- A heated bed at 100-120°C is required to ensure good adhesion and reduce warping.
- ABS may produce odor during printing; it is recommended to print in a well-ventilated area.
- Should be stored in a dry place to prevent moisture absorption.
Technical Specifications
| Density (g/cm³) |
1.04 |
| Melt Flow Index |
7 (220°C/10KG) |
| Heat Distortion Temp (°C, 0.45MPa) |
104.4 |
| Tensile Strength (MPa) (XY) |
46.29 |
| Tensile Strength (MPa) (Z) |
16.02 |
| Elongation at Break (%) (XY) |
5.49 |
| Elongation at Break (%) (Z) |
2.32 |
| Flexural Strength (MPa) (XY) |
75 |
| Flexural Strength (MPa) (Z) |
29.8 |
| Flexural Modulus (MPa) (XY) |
2479.54 |
| Flexural Modulus (MPa) (Z) |
2137.66 |
| IZOD Impact Strength (kJ/m²) (XY) |
26.76 |
| IZOD Impact Strength (kJ/m²) (Z) |
1.99 |
Printing Parameters
-
Nozzle Temp: 240 - 260°C
-
Bed Temp: 100 - 120°C (Essential)
-
Fan Speed: 0%
-
Printing Speed: Below 200 mm/s
-
Recommendation: It is recommended to print in an enclosed printer to maintain consistent temperature.
